Electric cars · practical guide

How much does it cost to charge an EV at home?

The answer depends on more than battery size. This guide shows a transparent calculation that separates energy stored in the car from electricity measured at your home meter.

From charging to cost

1Metered energykWh at the charger
2Price per intervalyour variable all-in rate
3Charging costenergy × price
Illustrative calculation only. These figures are not current electricity prices or a promise of savings.

Start with the kWh measured at the meter

An EV usually displays energy stored in its battery, while a wallbox or household meter measures electricity drawn by the charging installation. The two amounts can differ because conversion, cables and battery temperature management use energy too.

For a bill estimate, the most direct input is therefore the kWh recorded by the meter or charger. If you start with energy added to the vehicle battery, you would need the real charging losses for that car and situation. A generic loss percentage is only an estimate.

Use the price that applied when the energy was used

With a variable electricity contract, the price can change during the day. Calculate each interval separately: metered kWh in that interval multiplied by the price for the same interval. Add the interval costs to get the total.

Use the variable import price that matches your bill if you want to estimate the extra cost. Depending on your contract and network area, it may combine wholesale energy, supplier mark-up, network charges and taxes including VAT. A fixed subscription usually does not change when you move charging.

  • Match the measurement and price to the same interval and time zone.
  • Grid import and any export credit are separate items.
  • A negative wholesale price does not necessarily make your total bill price negative.

From battery percentage to energy

A 10 percentage-point change in state of charge does not represent the same energy in every car. As a rough estimate, multiply the percentage change by the vehicle's usable battery capacity. That estimates energy stored in the battery, not exactly what the meter recorded.

For a retrospective bill calculation, the charger’s energy measurement is better. It records electricity drawn from the grid, while the vehicle display may be rounded or estimated.

When can charging be shifted?

If the car is parked at home long enough, charging can often move to intervals with a lower total variable price. But the lowest wholesale price is not always the cheapest time on your bill: time-dependent network tariffs or demand charges can change the comparison.

Charge for the next journey and reserve you actually need. A high battery level is not automatically a saving, and the vehicle maker’s guidance for routine charging and battery care still matters.

What can energy management do?

An energy management system can compare the car’s requirement, how long it is expected to be connected and the prices that are actually available. In a home with solar, a stationary battery or a heat pump, charging should also be considered alongside the rest of the household load.

Fluks can coordinate supported devices using measurements and price data. Your electricity contract, network operator, vehicle controls and available data still determine what can be controlled and what you pay.

Further reading on prices and metering

European Commission: electricity prices and bill components ↗